Breaking News

How To Replace A Brake Light Bulb In Four Easy Steps?

How To Replace A Brake Light Bulb In Four Easy Steps?

Stage 1: Identify The Faulty Light

There are usually several bulbs under each taillight focus, and one of these bulbs is the brake light. Have someone sit in the vehicle and step on and off the brake pedal a few times while you stay behind the vehicle and check the operation of the brake lights.

Identify which bulb under the tail light focus cover is the worn brake light. There may be several bulbs under each focus, but only one is a brake bulb. Recognizing the location of the brake light bulb under the focus can help you next time you are looking for the right replacement bulb. If this seems a bit difficult, ask a nearby car repair shop for help.

Stage 2: Locate And Remove The Brake Light Bulb

Most modern vehicles allow access to all tail light bulbs from the storage area. Open the storage compartment and look directly behind the focus of the tail light with the failing bulb. You will see the wires and plastic base where each tail light bulb is located. Use a flashlight to find out which bulb in the accommodation is the brake light.

Turn the brake light holder counterclockwise to pop it out, then at this point pull the bulb holder and bulb into the storage compartment. Remove the damaged bulb from the holder.

Brake Lights Stay On? [5 Causes & How To Fix It Easily]

Stage 3: Secure A New Brake Light Bulb

You don’t have to carry a worn brake light bulb with you when you shop, but having it close at hand will help ensure you get the right replacement bulb. Visit a web provider to find the right brake light bulb for your vehicle make and model. Then revisit the auto parts supplier with your old bulb nearby. Consider buying two bulbs and keeping an extra one in the dash compartment. If one brake light is worn out, the other will likely go out soon.

Stage 4: Introduce And Test The New Bulb

  • Test the new car bulb
  • Install the new bulb in the holder.
  • Slide the holder and bulb into the tail light holder and secure the holder by turning it clockwise.
  • Make sure the bulb and holder are firmly occupied by the tail light.
  • Get someone to drive everything, step on the brake pedal and you watch the light activity from behind.

The brake light bulb in stock here on our website.. If you are looking for brake light bulbs then visit our website to get one now.